BUSTER Design Collar Bones 7.5cm: Fit Guide for Small Cats

By Calibra | Published: 2026-10-30

Category: Product Reviews

Learn how to properly fit the BUSTER Design Collar Bones 7.5cm on your small cat. This step-by-step guide covers sizing, adjustment, and common mistakes to avoid for a secure recovery collar.

Quick answer

The BUSTER Design Collar Bones 7.5cm is an inexpensive, transparent recovery collar with a quick clic closing system, ideal for small cats needing to prevent wound licking. Follow these steps to ensure a secure and comfortable fit.

Why choose the 7.5cm size for small cats

The BUSTER Design Collar Bones 7.5cm is specifically designed for small pets, making it a good choice for kittens or small adult cats. Its 100% polypropylene material is flexible and easy to handle, allowing your cat to move comfortably while still preventing access to wounds on the head and body. The transparent design also helps reduce visual obstruction, which can be less stressful for your pet.

Trade-offs: what to consider

While the 7.5cm collar is lightweight and easy to fit, it may not be suitable for larger cats or those with thick necks. The clic closing system is quick but can be accidentally unfastened if not properly secured. Additionally, because the collar is transparent, it may become scratched over time, potentially reducing visibility. Always supervise your cat during the initial adjustment period.

Step-by-step fitting guide

Measure your cat's neck: Use a soft measuring tape to measure the circumference of your cat's neck. The collar should fit snugly but allow two fingers to slide between the collar and the neck. For the 7.5cm size, the neck measurement should be within the collar's adjustable range (typically 17-22 cm). A too-loose collar can slip off; a too-tight collar can cause choking or discomfort.
Open the clic closing system: Press the tabs on the clic buckle to release the collar. Hold the collar with the printed bones facing outward. Ensure the collar is not twisted before placing it around your cat's neck. Check that the buckle is not obstructed by fur or debris, which can prevent a secure closure.
Position the collar correctly: Place the collar around your cat's neck with the wider part toward the shoulders. The collar should sit high enough to prevent your cat from reaching wounds on the head or body, but low enough to allow normal breathing and swallowing. If the collar is too high, it may press on the throat; if too low, your cat might still reach wounds.
Close and adjust the fit: Press the clic buckle closed until you hear a click. Gently pull on the collar to ensure it is secure. Adjust the collar's position so it is centered and comfortable. Recheck the two-finger rule. A common mistake is not pressing the buckle firmly enough, leading to accidental unfastening.
Monitor your cat's behavior: Observe your cat for the first 30 minutes after fitting. Look for signs of stress, such as excessive scratching, drooling, or attempts to remove the collar. If your cat seems distressed, check the fit again or consult your veterinarian. Some cats may need a gradual introduction to wearing the collar; start with short periods and increase duration.

Product details

BUSTER Design Collar Bones 7.5cm L.Blue: The BUSTER Design Collar is made of 100% polypropylene, flexible and easy to handle, with a quick clic closing system. This makes it easy to put on and take off your small cat without causing discomfort, and the transparent material helps your pet see their surroundings.
BUSTER Design Collar Bones 7.5cm L.Blue